Our range of stainless steel sheets are available in grades like 304, 304L, 316, 316L, 317L, 321, 316 Ti, 309, 310, 904L, 410, 420, 430, 431, 202, etc.

Material	Size	Thickness	Specification	Manufacturer
Stainless Steel	1000 mm x 2000 mm, 1220 mm x 2440 mm (4' x 8'), 1220 mm x 4880 mm, 1250 mm x 2500 mm, 1500 mm x 3000 To 6300 mm, 2000 mm x 2000 To 10000 mm, As per requirement	0.1 mm To 150 mm	A-240	Jindal, Shah Alloys, Imported, etc.

Sheet Finishing:
2B, 2D, HR, CR, BA (No. 8), No. 4, Satin (Met with PVC Coated)

Sheet & Plate In Form Of: Coils, foils, shim sheet, perforated sheet, chequered plate, strip, flats, blank (circle), ring (flange), etc.

Value Added Service:
• Cladding, heat treatment.
• Annealed & pickling, polish & buffing.
• Rolling, cutting, bending, forging, minor fabrication, etc.

Test Certificate:
• Manufacturer Test Certificate
• Laboratory Test Certificate from Govt. Approved Lab.
• Under Third Party Inspection with Excise Gate Pass to avail Modvat benefit.

Specialize:
• Shim sheet, perforated sheet (round, square & oblong hole) & as per your drawing.

Our range of nickel alloy plates are available in 2B, 2D, HR, CR, BA (No. 8), No. 4, Satin (Met with PVC Coated) sheet finishing.

Material	Size	Thickness	Specification
Cupro Nickel Hastelloy Nickel Monel Inconel Titanium Alloy 20 S. S. 904L	1000 mm x 2000 mm 1220 mm x 2440 mm (4' x 8') 1250 mm x 2500 mm 1500 mm x 3000 mm As per Requirement	0.1 mm to 20 mm Thk.	IS BS ASTM UNS
Duplex

Grades:
Cupro Nickel (90/10, 70/30), Hastelloy (C-4, C-22, C276, B-2), Nickel (200 / 201 / 205), Monel (K400 & K500), Inconel (600, 601, 625 & 825), Incolloy (800, 800H), Alloy 20, Titanium, Tungston, Moly, Kanthal, Nimonic Nichrome, Cobalt, Sanicro (28, SS 904L), etc.

Sheets & Plates In Form Of: Coils, foils, shim sheet, perforated sheet, strip, flats, blank (circle), ring (flange), etc.

Value Added Service:
• Heat treatment.
• Annealed & pickling.
• Rolling, cutting, bending, forging, minor fabrication, etc.

Test Certificate:
• Laboratory Test Certificate from Govt. Approved Lab.
• Under Third Party Inspection

Specialize:
• Shim sheet, perforated sheet (round, square) & as per your drawing.

Non ferrous metals sheets comes in Bi-Metals, White Metal, Antimony, Tin, Zinc Anodes grades

S.No.	Material	Size	Thickness	Specification
1	Copper Brass Aluminium Phosphorus Bronze Gun Metal Lead Zinc Duplex & Special Alloy	12” x 48” 14” x 48” 16” x 48” 24” x 48” 2’ x 2’ 2’ x 4’ 4’ x 8’ 4’ x 4’	0.1 mm to 65 mm Thk. 47 Swg. to 10 Swg.	IS BS ASTM
2	Copper Brass Phosphorus Bronze Lead	In Grade	99.99% (Rolled – Hot & Cold, Electrolytic & Commercial) Naval Brass, Rolled-Hot & Cold-60/40, 63/37, 70/30 Etc. PB2, 90/10 Etc. 99.95 to 99.99%

Sheets & Plates In Form Of: Coils, foils, rolls, plain, flats, strip, blank (circle), ring (flange) & perforated sheet, shim sheet, etc.

Value Added Service:
• Electroplating
• Annealed & pickled.
• Rolling, cutting, bending.
• Forging, minor fabrication, etc.

Test Certificate:
• Laboratory Test Certificate from Govt. Approved Lab.

Specialize:
• Hardness: soft, hard, half hard, quarter hard, spring hard, etc.